How much does a multi-room heat pump cost in Takapuna?

Multi-room heat pump installations in Takapuna run from $7,500 for a two-room system up to $14,000 or more for four or five rooms. All prices include supply of all indoor and outdoor units, installation and electrical connections.

Is a multi-room system cheaper than separate heat pumps in each room?

For three or more rooms the multi-room system usually wins on total cost because you only pay for one outdoor unit and one electrical connection. For two rooms it is often similar in price to two separate units.

Can I mix different indoor unit types in the same multi-room system?

Yes. You can combine high wall units, ceiling cassettes and floor mounted units in the same multi-room system, all connected to one outdoor unit.

Takapuna and North Shore Auckland

Multi-Room Heat Pump Installation Takapuna

One outdoor unit. Multiple indoor units. Heat every room in your home independently without the cost of a fully ducted system. Craig installs multi-room systems across Takapuna and the North Shore.

Get a Free Quote 09 243 0791

One outdoor unit, up to 5 rooms Each room controlled independently All major brands installed Free on-site assessment

Multi-room heat pump outdoor unit installed on a North Shore Auckland home

Installed from

$7,500 incl. GST

Multi-room heat pump installation in a Takapuna North Shore home

What Is a Multi-Room Heat Pump and Why Choose It?

A multi-room system, sometimes called a multi-split, connects one outdoor compressor to multiple indoor units across your home. Each indoor unit has its own remote control so every room can be set to a different temperature independently.

On the North Shore it's the most popular whole-home heating solution for homes that aren't suited to a fully ducted system. It costs less than ducted, installs faster, and gives you individual room control that most ducted systems can't match without expensive zoning add-ons.

One outdoor unit instead of multiple, cleaner exterior appearance
Each room heated and cooled independently at its own temperature
More affordable than a fully ducted whole-home system
Works well in older North Shore homes where ducted access is difficult
Installed in a single day for most 2 to 3 room configurations
Mix indoor unit types in the same system. A sleek high wall in the lounge, a floor mounted console in the drafty conservatory, and a small bedroom unit, all running off the same outdoor box

How a Multi-Room System Works

One outdoor unit does all the heavy lifting. The indoor units in each room connect back to it via refrigerant pipe. Running pipes to multiple rooms takes planning. Craig maps out the shortest, tidiest route on the site visit to keep labour costs down and your home looking clean.

Outside your home

One outdoor unit

Runs all indoor units simultaneously

Refrigerant pipe

Living room — set to 21°C

High wall or ceiling cassette unit

Master bedroom — set to 19°C

High wall unit, own remote

Kids bedroom — off until needed

Only running when required

Optional 4th or 5th room

Up to 5 indoor units per outdoor unit

Straight-up tip from Craig

One thing to know: because everything runs off one outdoor unit, if that unit needs a part, the whole house is out of action. That's why I only install the big reliable brands like Mitsubishi Electric and Daikin for multi-room systems. You want a unit that's built to last and has parts available in Auckland if something goes wrong in 10 years.

Common Multi-Room Configurations

Most North Shore homes fall into one of these three setups. Craig will design the right configuration for your layout.

Two-room system

$7,500 to $10,000

Living room and master bedroom. The most common starting point for North Shore homeowners who want whole-home heating without the cost of three or four separate units.

Three-room system

$9,000 to $12,000

Living room, master bedroom and a third room such as a kids bedroom, office or open plan kitchen. Covers most of a standard North Shore family home efficiently.

Most common family home install

Four or five room system

$11,000 to $14,000+

Full whole-home coverage for larger North Shore homes. At four or five rooms Craig will also discuss whether ducted makes more sense for your budget and layout.

Whole-home coverage

Multi-Room vs Ducted vs Single Units: Which Is Right?

Three ways to heat multiple rooms. Here is the honest difference between them for North Shore homeowners.

Multi-room system

One outdoor unit, multiple rooms

One outdoor unit for the whole home
Each room controlled independently
Works in older homes where ducted is difficult
Lower cost than ducted, $7,500 to $14,000
Installed in one to two days

Ducted whole-home

Hidden in the ceiling, no wall units

No visible indoor units anywhere
Even temperature throughout the home
Needs good ceiling cavity access
Higher cost, $8,000 to $25,000
Takes 2 to 3 days to install

Multiple single units

One high wall per room, separate outdoor units

Multiple outdoor units on the exterior
Each room fully independent
Can be cheaper for 2 rooms, comparable for 3
More outdoor units, busier exterior
Craig will compare both options on the site visit

How Craig Installs a Multi-Room System

A two or three room system typically takes one full day. Larger configurations may need two days.

Site visit and system design

Craig visits, walks through each room, designs the pipe routes, selects the right outdoor unit capacity for your total room count, and gives you a written fixed-price quote.

Free, no obligation

System ordered

Craig orders the outdoor unit and all indoor heads together. The full system arrives as a matched set to ensure compatibility and warranty coverage.

3 to 7 days

Installation day

Craig and the team install all indoor units, run refrigerant pipe to each one and back to the outdoor unit, connect the electrics, and commission the full system.

1 to 2 days

Every room running

Craig tests each indoor unit individually, walks you through the controls for every room, and makes sure the whole system is balanced and running correctly before he leaves.

Same day or day 2

Multi-Room Heat Pump Questions

Is a multi-room system (multi-split) cheaper than separate heat pumps in each room?

For two rooms it's often similar in price or slightly more expensive than two separate high wall units. For three or more rooms the multi-room system usually wins on total cost because you're only paying for one outdoor unit and one electrical connection. You also get a cleaner exterior with just one outdoor unit rather than three or four. Craig will compare both options honestly on the site visit so you can see the actual numbers before deciding. Read more on the single room heat pump page.

Can all rooms run at the same time?

Yes. All indoor units can run simultaneously. The outdoor unit is sized to handle the total capacity of all connected indoor units running at once. Craig sizes the outdoor unit correctly on the site visit so the system isn't underpowered on the coldest winter nights.

Can I mix different indoor unit types in the same system?

Yes. You can have a ceiling cassette in the open plan living area, high wall units in the bedrooms, and a floor mounted unit in a conservatory, all connected to the same outdoor unit. Craig will design the right mix for your home and confirm which combinations the chosen brand supports.

Multi-room or ducted, which is right for my home?

Multi-room is the better option for most existing North Shore homes, especially older ones where the ceiling access for ducted is limited. Ducted makes more sense for new builds or full renovations where the ceiling is open, or for homeowners who specifically want no visible wall units anywhere. The price difference closes as you add more rooms. Craig will give you an honest recommendation on the site visit. Read more on the ducted heat pump page.

Do I need a council permit?

Usually no. Standard multi-room installations are a permitted activity under Auckland Council rules as long as the outdoor unit placement doesn't breach boundary setbacks or create unreasonable noise for neighbours. Craig handles the placement to keep you compliant and will flag anything unusual during the site visit.